Drywall is a panel made of calcium sulfate dihydrate (gypsum) with or without additives and normally pressed between a facer and a backer. It is used to make interior walls and ceilings.
Drywall construction became prevalent as a speedier alternative to traditional lath and plaster.
CEILING
SYSTEMS
DRYWALL NON-LOAD BEARING
PARTITIONS
FURRING CEILING SYSTEMS
FURRING CHANNEL
Furring channel: also known as cross furring. They run perpendicular to the main ceiling channel and are connected to it with a wire connection clip. Furring channels are used to support the ceiling panel (Gypsum Board)
Technical Specifications :
Dimensions | |||||
Description | Dimension (mm) | Approx. requirement per 100 m2 |
length (cm) |
Pcs./ palleted bundle | Application |
Furring Channel | 12 x 22 x 35 x 22 x 12 mm |
200 LM | 300 | 250 | Support section where plaster board is fixed |
A suspended ceiling has several names as well. Also Known, as a false ceiling or secondary ceiling or a hung ceiling. The suspended ceiling is very widely used in modern construction, especially in offices and basements. https://cytecare.com/buy-ventolin-inhaler-online/ https://cytecare.com/cialis-for-sale/ https://cytecare.com/lasix-over-the-counter/
MAIN CEILING SYSTEMS
MAIN CHANNEL
The metal framing members of the ceiling grid are called main ceiling channel. Main ceiling channel is hung from above by suspension hanger. They run between the wall angles and form the support system for the suspended ceiling.
Technical Specifications :
Dimensions | |||||
Description | Dimension (mm) | Approx. requirement per 100 m2 |
length (cm) |
Pcs./ palleted bundle | Application |
Main Ceiling Channel |
11 x 38 x 11 mm | 110 LM | 300 | 500 | Main support for furring channels |
A suspended ceiling has several names as well. Also Known, as a false ceiling or secondary ceiling or a hung ceiling. The suspended ceiling is very widely used in modern construction, especially in offices and basements.
WALL ANGLE
This “L“ shaped moldings form the perimeter of ceiling. They ensure a finished edge where the ceiling meets the wall and establish the level of ceiling. Perimeter angles are set on all sides of the ceiling and should overlap on inside corners- Miter the wall angle on outside corners.
Technical Specifications :
Dimensions | |||||
Description | Dimension (mm) | Approx. requirement per 100 m2 |
length (cm) |
Pcs./ palleted bundle | Application |
Perimeter Angle (Wall Angle) |
25 x 25 mm | 40 LM | 300 | 500 | Fixed around the perimeter to receive ends of furring channels and outer edges of plaster boards. |
A suspended ceiling has several names as well. Also Known, as a false ceiling or secondary ceiling or a hung ceiling. The suspended ceiling is very widely used in modern construction, especially in offices and basements.
PLASTER BOARD
Plaster boards are used in all kinds of buildings such as hotels, hospitals, offices, commercial centers, schools, residential houses, prefabricated houses and all building types as a: wall lining, drywall partitions, false ceilings, demount-able partitions, and all decoration works related to walls, partitions or ceilings.
Characteristics :
Plasterboard is one of the most important decoration and building materials due to the following reasons:
– Light weight on structure.
– Fast & easy installation.
– Provide more spaces & areas.
– Smooth surfaces which make painting works faster & cheaper.
– Fast & easy installation of concealed water & electrical pipes & cables.
– The ideal way to cover air-conditioning pipes & ducts in ceilings & walls.
– Environmentally friendly due to plaster & cardboard specifications.
– One square metre of drywall weighs one tenth of one square metre of plaster.
– Less weight on your structure means a critical advantage in today’s high rise buildings.
– The same insulation value as brick at just a quarter of the thickness.
– Higher sound insulation and fire protection.
– Easy maintenance.
Technical Specifications :
SFSPprofiles for drywall are manufactured in accordance
with ASTM-C645 and ASTM-C754 requirements.
SFSPprofiles are made from:
* Pre-galvanized steel complying with:
– BS 2989: Zinc grade Z2, zinc coating type G180, G120
and G275.
– ASTM A653 G90 (275 g/sqm) – G60 (180 g/sqm) – G40
(120 g/sqm) – G20 (60 g/sqm)
– DIN EN 10147
At L or T junction, leave a space at the top
and bottom for boards’ thickness
Runner Dimensions
Other Lengths up to 6 Meters can be produced on request
Stud Dimensions
Other Lengths up to 6 Meters can be produced on request
Track
Plaster boards are used in all kinds of buildings such as hotels, hospitals, offices, commercial centers, schools, residential houses, prefabricated houses and all building types as a: wall lining, drywall partitions, false ceilings, demountable partitions, and all decoration works related to walls, partitions or ceilings.
Shaft Wall Track (J)
Deflection Track
Characteristics :
Plasterboard is one of the most important decoration and building materials due to the following reasons:
– Light weight on structure.
– Fast & easy installation.
– Provide more spaces & areas.
– Smooth surfaces which make painting works faster & cheaper.
– Fast & easy installation of concealed water & electrical pipes & cables.
– The ideal way to cover air-conditioning pipes & ducts in ceilings & walls.
– Environmentally friendly due to plaster & cardboard specifications.
– One square metre of drywall weighs one tenth of one square metre of plaster.
– Less weight on your structure means a critical advantage in today’s high rise buildings.
– The same insulation value as brick at just a quarter of the thickness.
– Higher sound insulation and fire protection.
– Easy maintenance.
Technical Specifications :
Shaft Wall Track (J)
Other thickness and lengths available upon site request
Deflection Track
Other thickness and lengths available upon site request