FLOOR EXPANSION JOINTS ALL METAL
All metal expansion joints for intensive traffic.
JSH 6-02
- MATERIAL : STEEL, STAINLESS STEEL,BRASS.
- COLOR : NATURAL.
- VERSION : FLAT.
- For intensive heavy-duty traffic
- All types of finishes: concrete, screed, tiles…
- For joint gaps up to 70 mm
DESCRIPTION:
All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries… Suitable for indoor and outdoor applications. The upper cover plate can be supplied in various widths according to the expected expansion movement. Suitable for all types of applications: industrial floors, station, airports, shopping centers…
Installation:
For indoor and outdoor floor joints with a gap up to 70 mm. Suitable for heavy loads of up to 7.5 tonnes/axle and traffic of fork-lift truck on solid tires , pallet trucks and vehicles on pneumatic tires.
FINISHES AND SPECIAL PIECES:
This joint is available with galvanized steel or stainless steel side angle sections, and galvanized steel, brass or 304 or 316 stainless steel cover plate. The two side angle sections can be fastened mechanically (type F) or embedded in the concrete floor (type S).
COMPOSING:
Section length of 6 m. Factory supply in lengths of 2 m, 3 m or 4 m as option. Galvanized steel or stainless steel side angle sections. Galvanized steel, stainless steel or brass cover plate.
Galvanized
| Material | Acier S235JR | Galvanisation DX51D + Z275 |
| Modulus of elasticity | 235 MPa | – |
| Value by Poisson | 0,3 | – |
| Density | 7,8 | – |
| Elongation at break | 340 MPa | – |
| Zinc quantity | – | 275 g/m2 |
| Thickness | – | 20 µ |
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
STAINLESS STEEL
| Material | Inox 304 |
| Density | 7,9 |
| Electrical resistivity | 0.73 |
| Specific heat | 500 |
| Thermal conductivity | 15 W / m.°C |
| Modulus of elasticity at 20°C | 200 MPa |
| Tear-growth resistance | 500 – 700 MPa |
| Tensile strength | 782 MPa |
| Elongation at break | 45% |
| Hardness Vickers | 160 – 200 HV |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.02 | W | S | B | H | |
| 6.02-015 | 15 | 5 / -15 | 75 | 145 | 30 |
| 6.02-030 | 30 | 15 / -10 | 130 | 160 | 57 |
| 6.02-040 | 40 | 15 / -20 | 140 | 170 | 57 |
| 6.02-070 | 70 | 15 / -10 | 130 | 200 | 30 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-04
- MATERIAL : STEEL, STAINLESS STEEL.
- COLOR : NATURAL.
- VERSION : FLAT.
- For intensive heavy-duty traffic
- All types of finishes: concrete, screed, tiles…
- For joint gaps up to 100 mm
DESCRIPTION:
All-metal floor expansion joint specially designed to withstand extremely heavy loads: load handling equipment, lorries… Suitable for indoor and outdoor applications. The top cover plate with the comb shape and the central support plate can be supplied in hardened steel or in stainless steel, depending on the strength required and the working environment. Suitable for all types of applications: industrial floors, station, airports, shopping centers…
Installation:
For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy loads of up to 19 tonnes/axle and traffic of fork-lift truck on solid tires , HGV, pallet trucks and other vehicles on pneumatic tires.
FINISHES AND SPECIAL PIECES:
Available in hardened steel or stainless steel. The standard joint has a section with a central flange for alignment; the STF60-L type has a stainless steel central support, with a more limited gap width and movement range. The mounting of this product is is essential; please enquirer regarding about the relevant technical instructions.
COMPOSING:
Length on request. Hardened steel or stainless steel.
STAINLESS STEEL
| Material | Inox 304 |
| Density | 7,9 |
| Electrical resistivity | 0.73 |
| Specific heat | 500 |
| Thermal conductivity | 15 W / m.°C |
| Modulus of elasticity at 20°C | 200 MPa |
| Tear-growth resistance | 500 – 700 MPa |
| Tensile strength | 782 MPa |
| Elongation at break | 45% |
| Hardness Vickers | 160 – 200 HV |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.04 | W | S | B | H | |
| 6.04-050 | 0 – 50 | 5 / -5 | 200 | 200 | 28 |
| 6.04-100 | 20 – 100 | 5 /-5 ** 10 /-10 | 300 | 300 | 28 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-06
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- For intensive heavy-duty traffic
- All types of finishes: concrete, screed, tiles…
- For joint gaps of 20 mm
DESCRIPTION:
Floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element made of aluminium, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 20 mm. Suitable for heavy traffic of fork-lift truck on pneumatic tires, lorries, pallet trucks and intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor. Special parts on demand (T, X, L…).
COMPOSING:
Section length of 4 m. Aluminium side angle sections, pre-drilled.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.06 | W | S | B | H | |
| JSH 6.06 | 20 | 3 / -3 | 30 | 127 | 20 / 50 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-08
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Seismic expansion joint
- For intensive heavy-duty traffic
- For joint gaps from 30 to 110 mm
DESCRIPTION:
All aluminium seismic floor expansion joint for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy traffic of fork-lift truck on pneumatic tires, pallet trucks and intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type, and floor-to-wall type with exposed skirting. Vapor membrane as option (for heights > 20 mm), which can be supplied as whole length to avoid joining on site. Surface finish: anti-slip ribbed (R) or plain (G). Special finish with anti-slip nitrile inserts on request (426/RS range). Special parts on demand (T, X, L…).
COMPOSING:
Section length of 4 m. Nitrile vapor barrier. Aluminium side angle sections, pre-drilled
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
Nitrile
| Material | Nitrile DIN 18541 | Test Method |
| Shore A hardness | 67 ± 5 | ISO 868 |
| Density | 1,25 | ISO R 1183 |
| Tensile strength | ≥ 10 MPa | ISO R 527-2 |
| Elongation at break | ≥ 350 % | ISO R 527-2 |
| Elongation at tear at 23°C | ≥ 350 % | DIN 53504 |
| Tear-growth resistance | ≥ 14 MPa | DIN 53504 |
| Linear tolerance | ± 0,7 % | DIN 16941 |
| Linear expansion coefficient | 15 – 17 x 10-5 K -1 | DIN 53752 |
| Fire resistance | B2 | B2 |
| EFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.08 | W | S | B | H | |
| 6.08-040 | 40 | 5 / -5 | 60 | 160 | 20 |
| 6.08-065 | 65 | 10 / -10 | 90 | 190 | 20 |
| 6.08-050 | 50 | 5 / -5 | 70 | 155 | 43 / 48 / 58 / 63 / 68 / 88 / 108 |
| 6.08-080 | 80 | 10 / -10 | 95 | 180 | 43 / 48 / 58 / 63 / 68 / 88 / 108 |
| 6.08-100 | 100 | 15 / -15 | 135 | 225 | 43 / 48 / 58 / 63 / 68 / 88 / 108 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-10
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- For intensive heavy-duty traffic
- For joint gaps from 40 to 100 mm
DESCRIPTION:
All-aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium upper components slide one into the other, which takes up any movement due to expansion and contraction. Interchangeable aluminium upper components (for heights H > 18.5 mm). Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 100 mm. Suitable for heavy traffic of fork-lift truck on pneumatic tires, lorries, pallet trucks and intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type, and floor-to-wall type with exposed skirting and hidden skirting. Vapor membrane as option (for heights > 18.5 mm), which can be supplied as whole length to avoid joining on site. Surface finish: anti-slip ribbed (R) or plain (G). Special finish with anti-slip nitrile inserts on request (JSH 6-10/RS range). Special parts on demand (T, X, L…).
COMPOSING:
Section length of 4 m. Nitrile vapor barrier. Aluminium side angle sections, pre-drilled.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
Nitrile
| Material | Nitrile DIN 18541 | Test Method |
| Shore A hardness | 67 ± 5 | ISO 868 |
| Density | 1,25 | ISO R 1183 |
| Tensile strength | ≥ 10 MPa | ISO R 527-2 |
| Elongation at break | ≥ 350 % | ISO R 527-2 |
| Elongation at tear at 23°C | ≥ 350 % | DIN 53504 |
| Tear-growth resistance | ≥ 14 MPa | DIN 53504 |
| Linear tolerance | ± 0,7 % | DIN 16941 |
| Linear expansion coefficient | 15 – 17 x 10-5 K -1 | DIN 53752 |
| Fire resistance | B2 | B2 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.10 | W | S | B | H | |
| 6.10-040 | 40 | 5 / -5 | 97 | 197 | 18,5 / 32 / 45,5 |
| 6.10-065 | 65 | 10 / -10 | 128 | 228 | 18,5 / 32 / 45,5 |
| 6.10-100 | 100 | 15 / -15 | 165 | 265 | 18,5 / 32 / 45,5 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-12
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Seismic expansion joint
- For intensive heavy-duty traffic
- For joint gaps from 60 to 110 mm
DESCRIPTION:
All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries… Suitable for indoor and outdoor applications. The central elements allow significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements and heavy loads. Suitable for heavy traffic of fork-lift truck on solid tires , loads of up to 6 tonnes/axle on pneumatic tires, lorries, pallet trucks and intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor.
COMPOSING:
Section length of 3 m. Aluminium side angle sections, pre-drilled.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.12 | W | S | B | H | |
| 6.12-060 | 60 | ± 15 | 80 | 170 | 18 / 35 / 50 / 80 |
| 6.12-080 | 80 | +20 / -20 | 110 | 250 | 50 / 80 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-14
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Reinforced seismic expansion joint
- For intensive heavy-duty traffic
- For joint gaps from 50 to 200 mm
DESCRIPTION:
All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries… Suitable for indoor and outdoor applications. The central elements allow significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements and heavy loads. Suitable for heavy traffic of fork-lift truck on solid tires, loads of up to 6 tonnes/axle on pneumatic tires, lorries, pallet trucks and intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor.
COMPOSING:
Section length of 3 m. Aluminium side angle sections, pre-drilled.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.14 | W | S | B | H | |
| 6.14-050 | 50 | ± 30 | 255 | 255 | 20 |
| 6.14-100 | 100 | ± 30 | 305 | 305 | 20 |
| 6.14-150 | 150 | ± 30 | 360 | 360 | 20 |
| 6.14-200 | 200 | ± 30 | 410 | 410 | 20 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-16
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Seismic expansion joint
- For wide gaps
- For joint gaps from 110 to 250 mm
DESCRIPTION:
Seismic floor expansion joint for indoor and outdoor applications, comprising two side angle sections and a central element of thick section made of aluminium, able to take up significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 250 mm. Suitable for intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor. Special parts on demand (T, X, L…).
COMPOSING:
Section length of 2 m. Aluminium side angle sections, pre-drilled.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.16 | W | S | B | H | |
| 6.16-110 | 110 | +20 / -20 | 130 | 250 | 35 / 50 / 80 |
| 6.16-250 | 250 | +50 / -50 | 300 | 410 | 50 – 80 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-18
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Joint de dilatation sismique
- Spécial grandes largeurs
- For opening joints between 135 et 340 mm
DESCRIPTION:
All-aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium inner components slide one into the other, which takes up any movement due to expansion and contraction. Upper components made of aluminium, with the option of a nitrile strip for leveling. Suitable for all types of finish: concrete, screed, tiling, etc
Installation:
For indoor and outdoor floor joints with a gap up to 340 mm. Suitable for intense traffic of pedestrians and light trolleys (airport, supermarkets…), as well as traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type, and floor-to-wall type with exposed skirting (type A) and hidden skirting (type AV). Ribbed anti-slip surface. Nitrile strip for leveling as option. Special finish with anti-slip nitrile inserts on request. Special parts on demand (T, X, L…).
COMPOSING:
Section length of 4 m. Aluminium side angle sections, pre-drilled. Nitrile strip as option.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| RE+D3:I8FERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.18 | W | S | B | H | |
| 6.18-135 | 135 | ± 20 | 165 | 255 | 43 / 48 / 58 / 63 / 68 / 88 |
| 6.18-210 | 210 | ± 50 | 250 | 340 | 43 / 48 / 58 / 63 / 68 / 88 |
| 6.18-250 | 250 | ± 60 | 280 | 370 | 43 / 48 / 58 / 63 / 68 / 88 |
| 6.18-340 | 340 | ± 75 | 375 | 465 | 43 / 48 / 58 / 63 / 68 / 88 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-20
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Seismic expansion joint
- For wide gaps
- For joint gaps from 135 to 340 mm
DESCRIPTION:
All-aluminium seismic floor expansion joint for indoor and outdoor applications. The two aluminium inner components slide one into the other, which takes up any movement due to expansion and contraction. Interchangeable upper components made of aluminium, with the option of a nitrile strip for leveling. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 340 mm. Suitable for intense traffic of pedestrians and light trolleys (airport, supermarkets…), as well as traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor and floor-to-wall types. Anti-slip ribbed surface. This product is supplied ready to install, with spacers that must be removed after installation on the floor. Special parts on demand (T, X, L…).
COMPOSING:
Floor-to-floor type, and floor-to-wall type with exposed skirting (type A) and hidden skirting (type AV). Ribbed anti-slip surface. Nitrile strip for leveling as option. Special finish with anti-slip nitrile inserts on request. Special parts on demand (T, X, L…).
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.20 | W | S | B | H | |
| 6.20-135 | 135 | ± 20 | 195 | 255 | 32 / 45,5 |
| 6.20-210 | 210 | ± 50 | 280 | 380 | 32 / 45,5 |
| 6.20-250 | 250 | ± 60 | 310 | 410 | 32 / 45,5 |
| 6.20-340 | 340 | ± 75 | 405 | 505 | 32 / 45,5 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-22
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Seismic expansion joint
- For wide movements : 50 %
- For joint gaps from 50 to 200 mm
DESCRIPTION:
SPECOM’s JSH 6.22 seismic expansion joint and fire stop expansion joint comprises side angle sections and a central plate made of aluminium. It is able to take up large expansion and contraction movements, as well as vertical shearing movements, and is also suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
The JSH 6.22 seismic expansion joint and fire stop expansion joint can be used for indoor and outdoor floor joints where a gap of up to 200 mm, with significant movement, is present. It is suitable for pedestrian and light trolley traffic.
FINISHES AND SPECIAL PIECES:
SPECOM’s JSH 6.22 range includes floor-to-floor (JSH 6.22) and floor-to-wall (JSH 6.22A) versions, with anti-slip ribbed surfaces. Optional waterproof membranes, with the potential to integrate a drainage system to recover liquid, are also available. Moreover, the JSH 6.22 seismic expansion joint and fire stop expansion joint range can be used in association with vertical joints that offer the same finish and movement range (type JSV 4.02 or other).
COMPOSING:
The JSH 6.22 seismic expansion joint and fire stop expansion joint comes in 3m section lengths, and features aluminium side angle sections and middle plate.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.22 | W | S | B | H | |
| 6.22-050 | 50 | 25 / -25 | 170 | 170 | 27 |
| 6.22-100 | 100 | 50 / – 50 | 250 | 250 | 27 |
| 6.22-150 | 150 | 75 / – 75 | 320 | 320 | 27 |
| 6.22-200 | 200 | 100 / – 100 | 420 | 420 | 27 |
| 6.22-050 A | 50 | 25 / – 25 | 125 | 125 | 27 |
| 6.22-100 A | 100 | 50 / – 50 | 210 | 210 | 27 |
| 6.22-150 A | 150 | 75 / – 75 | 305 | 305 | 27 |
| 6.22-200 A | 200 | 100 / – 100 | 408 | 408 | 27 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-24
- MATERIAL : STAINLESS STEEL.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Seismic expansion joint
- For wide movements : 50 %
- For joint gaps from 50 to 200 mm
DESCRIPTION:
Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 200 mm (please enquirer if more width is required), with large amount of movements. SVF joints are particularly suitable for harsh environments such as the seaside, kitchens, swimming pools, water parks and thalassotherapy spas. Suitable for non-intense traffic of light vehicles, pedestrians and light trolleys.
FINISHES AND SPECIAL PIECES:
Floor-to-floor JSH 6.24 type , and floor-to-wall JSH 6.24 A type Anti-slip ribbed stainless steel. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. SVF joints can be matched to vertical joints in terms of finish and movement range (please enquirer).
COMPOSING:
Section length of 3 m. Stainless steel side angle sections and middle plate.
STAINLESS STEEL
| Material | Inox 304 |
| Density | 7,9 |
| Electrical resistivity | 0.73 |
| Specific heat | 500 |
| Thermal conductivity | 15 W / m.°C |
| Modulus of elasticity at 20°C | 200 MPa |
| Tear-growth resistance | 500 – 700 MPa |
| Tensile strength | 782 MPa |
| Elongation at break | 45% |
| Hardness Vickers | 160 – 200 HV |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.22 | W | S | B | H | |
| 6.22-050 | 50 | 25 / -25 | 170 | 170 | 25 |
| 6.22-100 | 100 | 50 / – 50 | 250 | 250 | 25 |
| 6.22-150 | 150 | 75 / – 75 | 320 | 320 | 25 |
| 6.22-200 | 200 | 100 / – 100 | 420 | 420 | 25 |
| 6.22-050 A | 50 | 25 / – 25 | 125 | 125 | 25 |
| 6.22-100 A | 100 | 50 / – 50 | 210 | 210 | 25 |
| 6.22-150 A | 150 | 75 / – 75 | 305 | 305 | 25 |
| 6.22-200 A | 200 | 100 / – 100 | 408 | 408 | 25 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-26
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Seismic expansion joint
- Special flexible floors
- For joint gaps from 50 to 200 mm
DESCRIPTION:
Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. . Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 200 mm (please enquirer if more width is required), with large amount of movements. JSH 6.26 joints are particularly suitable for hospitals, schools, etc. Suitable for intense pedestrians and light trolleys traffic.
FINISHES AND SPECIAL PIECES:
Floor-to-floor Series JSH 6.26 , and floor-to-wall Series JSH 6.26 A Anti-slip ribbed stainless steel. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. JSH 6.24 joints can be matched to vertical joints in terms of finish and movement range (please enquirer).
COMPOSING:
Section length of 3 lm. Stainless steel side angle sections and middle plate.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.26 | W | S | B | H | |
| 6.26-050 | 50 | +30 / -50 | 170 | 330 | 40 |
| 6.26-100 | 100 | +50 / -50 | 220 | 380 | 40 |
| 6.26-150 | 150 | +80 / -100 | 330 | 490 | 40 |
| 6.26-200 | 200 | +80 / -100 | 330 | 490 | 40 |
| 6.26-050 A | 50 | +40 / -30 | 125 | 205 | 40 |
| 6.26-100 A | 100 | +40 / -30 | 175 | 255 | 40 |
| 6.26-150 A | 150 | +55 / -60 | 240 | 320 | 40 |
| 6.26-200 A | 200 | +55 / -80 | 265 | 345 | 40 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-28
- MATERIAL : ALUMINIUM, STAINLESS STEEL.
- COLOR : NATURAL.
- VERSION : FLAT.
- Seismic expansion joint
- Special tiles and stones
- For joint gaps from 50 to 150 mm
DESCRIPTION:
Seismic floor expansion joint, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of hard floors (tiles, stone, marble, etc.), but can also be used with flexible floors or carpet.
Installation:
For indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements. Suitable for traffic of pedestrians and light trolleys.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type only. The central plate takes the mortar on which the floor covering in laid. Once the floor covering is laid, the joint is practically invisible; only two stainless steel sections remain exposed. Waterproof membrane as option, with possibility of integrating drainage system to recover the liquid. JSH 6.28 joints can be matched to vertical joints of similar finish and with the same movement range (please enquirer).
COMPOSING:
Section length of 3 m. Aluminium side angle sections and stainless steel middle plate.
STAINLESS STEEL
| Material | Inox 304 |
| Density | 7,9 |
| Electrical resistivity | 0.73 |
| Specific heat | 500 |
| Thermal conductivity | 15 W / m.°C |
| Modulus of elasticity at 20°C | 200 MPa |
| Tear-growth resistance | 500 – 700 MPa |
| Tensile strength | 782 MPa |
| Elongation at break | 45% |
| Hardness Vickers | 160 – 200 HV |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.28 | W | S | B | H | |
| 6.28-050 | 50 | 30 / – 24 | 170 | 210 | 62 |
| 6.28-100 | 100 | 30 / – 24 | 220 | 260 | 62 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-30
- MATERIAL : BRASS.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Brass expansion joint, luxurious finishes
- All types of finishes: screed, natural stone, cast stone, marble…
- For joint gaps of 30 mm
DESCRIPTION:
All-brass floor expansion joint for indoor and outdoor applications, comprising two side angle sections held by fixing brackets and a central element made of brass, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc.
Installation:
For indoor and outdoor floor joints with a gap up to 30 mm. Suitable for pedestrians and non-intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type only. Plain surface, brass.
COMPOSING:
Section length of 3 m. Brass brackets (4 pieces/m). Brass side angle sections.
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.30 | W | S | B | H | |
| 6.30-030 | 30 | 10 / -10 | 50 | 120 | 40 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-32
- MATERIAL : STAINLESS STEEL.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- For difficult environment: chemistry, industry, food industry…
- All types of finishes: screed, natural stone, cast stone…
- For joint gaps from 20 to 60 mm
DESCRIPTION:
All-stainless steer floor expansion joint for indoor and outdoor applications, comprising two side angle sections held by fixing brackets and two central elements made of stainless steel, able to take up expansion and contraction movements
Installation:
Suitable for all types of finish: concrete, screed, tiling, marble, etc.
FINISHES AND SPECIAL PIECES:
Section length of 3 lm. Stainless steel side angle sections.
COMPOSING:
For indoor and outdoor floor joints with a gap up to 35 mm. Suitable for pedestrian traffic.
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.32 | W | S | B | H | |
| 6.32-020 | 20 | 5 / -5 | 32 | 128 | 30 to 100 |
| 6.32-030 | 30 | 8 / -8 | 37 | 133 | 30 to 100 |
| 6.32-040 | 40 | 8 / -8 | 47 | 140 | 35 to 100 |
| 6.32-050 | 50 | 10 / -10 | 54 | 150 | 40 to 100 |
| 6.32-060 | 60 | 10 / -10 | 64 | 160 | 50 to 100 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-34
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Surface mounted floor expansion joint
- For intensive traffic
- For joint gaps from 35 to 50 mm
DESCRIPTION:
All aluminium floor expansion joint, surface-mounted, for indoor and outdoor applications. The two aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap between 35 mm and 50 mm. Installation on finished floors. Suitable for heavy traffic of fork-lift trucks on pneumatic tires, pallet trucks and intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type, and floor-to-wall type with exposed skirting (type E). Vapor membrane as option, which can be supplied as whole length to avoid joining on site. Drilled and countersunk available on request. Special parts on demand (T, X, L…).
COMPOSING:
Section length of 4 m. Nitrile vapor barrier. Aluminium side angle sections, not drilled
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.34 | W | S | B | H | |
| JSH 6.34-035 | 35 | 6 /-6 | 155 | 155 | 30 |
| JSH 6.34-050 | 50 | 8 /-8 | 170 | 170 | 30 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-35
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Expansion joint for level differences up to 40 mm
- For intensive vehicular traffic
- For joint gaps from 35 to 120 mm
DESCRIPTION:
All metal floor expansion joint for exterior and interior use. Suitable for all types of finishes: screed, natural stone, marble etc. Recommended in case of vertical differences up to 40 mm.
COMPOSING:
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.35 | W | S | B | H | |
| 6.35 | 35 – 120 | 40 mm | 260 | 260 | – |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
JSH 6-36
- MATERIAL : ALUMINIUM.
- COLOR : NATURAL.
- VERSION : FLAT & ANGLE.
- Surface mounted floor expansion joint
- For intensive traffic
- For joint gaps from 50 to 135 mm
DESCRIPTION:
All aluminium floor expansion joint, surface-mounted, for indoor and outdoor applications. The two top aluminium components slide one into the other, which takes up any movement due to expansion and contraction. Suitable for all types of finish: concrete, screed, tiling, etc.
Installation:
For indoor and outdoor floor joints with a gap of 50 mm, 70 mm or 100 mm. Installation on finished floors. Suitable for heavy traffic of fork-lift trucks on pneumatic tires, pallet trucks and intense traffic of light vehicles.
FINISHES AND SPECIAL PIECES:
Floor-to-floor type, and floor-to-wall type with exposed skirting (type A) and hidden skirting (type AV). Vapor membrane as option, which can be supplied as whole length to avoid joining on site. Surface finish: anti-slip ribbed (R) or plain (G). Special finish with anti-slip nitrile inserts on request. Drilled and countersunk available on request. Special parts on demand (T, X, L…).
COMPOSING:
Section length of 4 lm. Nitrile vapor barrier. Aluminium side angle sections, not drilled.
ALUMINIUM
| Material | Aluminium 6060 | Aluminium 6063 |
| Density | 2,7 | 2,7 |
| Elongation at break | min. 160 MPa | min. 215 MPa |
| Breaking limit | min. 215 MPa | min. 245 MPa |
| Elongation | min. 6 % | min. 6 % |
| Thermal conductivity at 20°C | 190 W / m.°C | 190 W / m.°C |
| Modulus of elasticity | 70.000 MPa | 70.000 MPa |
| Modulus of rigidity | 27.000 MPa | 27.000 MPa |
| Value by Poisson | 0,33 | 0,33 |
| Fire resistance | A 1 | A 1 |
Nitrile
| Material | Nitrile DIN 18541 | Test Method |
| Shore A hardness | 67 ± 5 | ISO 868 |
| Density | 1,25 | ISO R 1183 |
| Tensile strength | ≥ 10 MPa | ISO R 527-2 |
| Elongation at break | ≥ 350 % | ISO R 527-2 |
| Elongation at tear at 23°C | ≥ 350 % | DIN 53504 |
| Tear-growth resistance | ≥ 14 MPa | DIN 53504 |
| Linear tolerance | ± 0,7 % | DIN 16941 |
| Linear expansion coefficient | 15 – 17 x 10-5 K -1 | DIN 53752 |
| Fire resistance | B2 | B2 |
| REFERENCE | GAP (MM) | MOVEMENTS (MM) | VISIBLE WIDTH (MM) | TOTAL WIDTH (MM) | HEIGHT (MM) |
| JSH 6.36 | W | S | B | H | |
| 6.36-050 | 50 | 6 / -6 | 175 | 175 | 43 |
| 6.36-075 | 75 | 10 / -10 | 200 | 200 | 43 |
| 6.36-090 | 90 | 12.5 / -12.5 | 215 | 215 | 43 |
| 6.36-115 | 115 | 20 / -20 | 240 | 240 | 43 |
| 6.36-135 | 135 | 30 / -30 | 260 | 260 | 43 |
The load-bearing capacity is always indicated for a joint in its initial position. In case of opening movements, the load-bearing capacity significantly reduces and the product will thus be only adapted for a light pedestrian traffic. The indicated load-bearing capacities are based on pneumatic wheels vehicles with a contact surface of 200×200 mm.
