watertight profiles
Discover SPECOM’s watertight expansion joint profiles
WP 600-050
Technical Specifications:
Expansion joint profile suitable for terrace , parking areas that require water isolation. Compatible with membranes that provides full tightness in wet areas. When thermal insulation is performed over water isolation, the profiles systems is raised with concrete. It is recommended to use geotextile over membrane for protection.
| Joint Gap : | 50 mm |
| Profile Height : | Resistant to tones of vehicle and 6 tones of forklift traffic. 2,5 mm thickness stainless steel top cover , thermoplastic wing of 28 cm width.cJoints are integrated with air welding. Resistant to ultraviolet. Height alternatives: 50-60-70mm. |
| Movement Capacity: | +/- 10 mm |
| Profile Lenght: | 3 LM |
WP 600-050 K1
Technical Specifications:
It is the corner detail used in the plastering or ceramic application in the expansion joint corners. Resistant to tones of vehicle and 6 tones of forklift traffic. 2,5 mm thickness stainless steel top cover , thermoplastic wing of 28 cm width.cJoints are integrated with air welding. Resistant to ultraviolet. Height alternatives: 50-60-70mm.
Expansion joint profile suitable for terrace , parking areas that require water isolation. Compatible with membranes that provides full tightness in wet areas. When thermal insulation is performed over water isolation, the profiles systems is raised with concrete. It is recommended to use geotextile over membrane for protection.
| Joint Gap : | 50 mm |
| Profile Height : | Resistant to tones of vehicle and 6 tones of forklift traffic. 2,5 mm thickness stainless steel top cover , thermoplastic wing of 28 cm width.cJoints are integrated with air welding. Resistant to ultraviolet. Height alternatives: 50-60-70mm. |
| Movement Capacity: | +/- 10 mm |
| Profile Lenght: | 3 LM |
WP 600-050 K2
Technical Specifications:
Corner detail is suitable for certain wall and facade systems applications.
Expansion joint profile suitable for terrace , parking areas that require water isolation. Compatible with membranes that provides full tightness in wet areas. When thermal insulation is performed over water isolation, the profiles systems is raised with concrete. It is recommended to use geotextile over membrane for protection.
| Joint Gap : | 50 mm |
| Profile Height : | Resistant to tones of vehicle and 6 tones of forklift traffic. 2,5 mm thickness stainless steel top cover , thermoplastic wing of 28 cm width.cJoints are integrated with air welding. Resistant to ultraviolet. Height alternatives: 50-60-70mm. |
| Movement Capacity: | +/- 10 mm |
| Profile Lenght: | 3 LM |
WP 600-100
Technical Specifications:
Expansion joint profile suitable for terrace , parking areas that require water isolation. Compatible with membranes that provides full tightness in wet areas. Profile height is 70 mm could be raised to 90 mm width the levelling profiles.By this way , total application height would be 10 cm includind the epoxy resin.
| Joint Gap : | 100 mm |
| Profile Height : | Resistant to tones of vehicle and 6 tones of forklift traffic. 2,5 mm thickness stainless steel top cover , thermoplastic wing of 28 cm width. Joints are integrated with air welding. Resistant to ultraviolet. Height alternatives: 70-90mm. |
| Movement Capacity: | +/-20 mm |
| Profile Lenght: | 3 LM |
WP 600-100 K
Technical Specifications:
Corner detail for WP 600-100 profiles.
Expansion joint profile suitable for terrace , parking areas that require water isolation. Compatible with membranes that provides full tightness in wet areas. Profile height is 70 mm could be raised to 90 mm width the levelling profiles.By this way , total application height would be 10 cm includind the epoxy resin.
| Joint Gap : | 100 mm |
| Profile Height : | Resistant to tones of vehicle and 6 tones of forklift traffic. 2,5 mm thickness stainless steel top cover , thermoplastic wing of 28 cm width. Joints are integrated with air welding. Resistant to ultraviolet. Height alternatives: 70-90mm. |
| Movement Capacity: | +/-20 mm |
| Profile Lenght: | 3 LM |
WP 600-150
Technical Specifications:
Water insulation requires terraces, parking lots, dilatation profile compatible with rubber-reinforced bituminous membrane providing complete leak-tightness in wet volumes. 70 mm foot height.
| Joint Gap : | 150 mm |
| Profile Height : | 70 mm | 9 tons of vehicle, 3.5 tons of forklift load resistant. 2.5 mm thick stainless top cover, 28 cm wide thermoplastic side flap, additional locations are available with corner details coupled with air supply ultraviolet resistant dilatation profile. |
| Movement Capacity: | +/- 50 mm |
| Profile Lenght: | 3 M |
WP 600-150 K
Technical Specifications:
Corner detail for WP 600-150 profiles.
Water insulation requires terraces, parking lots, dilatation profile compatible with rubber-reinforced bituminous membrane providing complete leak-tightness in wet volumes. 70 mm foot height.
| Joint Gap : | 150 mm |
| Profile Height : | 70 mm | 9 tons of vehicle, 3.5 tons of forklift load resistant. 2.5 mm thick stainless top cover, 28 cm wide thermoplastic side flap, additional locations are available with corner details coupled with air supply ultraviolet resistant dilatation profile. |
| Movement Capacity: | +/- 50 mm |
| Profile Lenght: | 3 M |
